Skip to main content

...About 8 min

TsFile API

TsFile is a file format of Time Series used in IoTDB. This session introduces the usage of this file format.

TsFile library Installation

There are two ways to use TsFile in your own project.

  • Use as jars: Compile the source codes and build to jars
git clone
cd tsfile/
mvn clean package -Dmaven.test.skip=true

Then, all the jars are in folder named target/. Import target/tsfile-0.12.0-jar-with-dependencies.jar to your project.

  • Use as a maven dependency:

    Compile source codes and deploy to your local repository in three steps:

    • Get the source codes

      git clone
    • Compile the source codes and deploy

      cd tsfile/
      mvn clean install -Dmaven.test.skip=true
    • add dependencies into your project:


    Or, you can download the dependencies from official Maven repository:

    • First, find your maven settings.xml on path: ${username}\.m2\settings.xml
      , add this <profile> to <profiles>:

                  <name>Apache Development Snapshot Repository</name>
    • Then add dependencies into your project:


TsFile Usage

This section demonstrates the detailed usages of TsFile.

Time-series Data
Time-series data is considered as a sequence of quadruples. A quadruple is defined as (device, measurement, time, value).

  • measurement: A physical or formal measurement that a time-series data takes, e.g., the temperature of a city, the
    sales number of some goods or the speed of a train at different times. As a traditional sensor (like a thermometer) also
    takes a single measurement and produce a time-series, we will use measurement and sensor interchangeably below.

  • device: A device refers to an entity that takes several measurements (producing multiple time-series), e.g.,
    a running train monitors its speed, oil meter, miles it has run, current passengers each is conveyed to a time-series dataset.

One Line of Data: In many industrial applications, a device normally contains more than one sensor and these sensors
may have values at the same timestamp, which is called one line of data.

Formally, one line of data consists of a device_id, a timestamp which indicates the milliseconds since January 1,
1970, 00:00:00, and several data pairs composed of measurement_id and corresponding value. All data pairs in one
line belong to this device_id and have the same timestamp. If one of the measurements does not have a value
in the timestamp, use a space instead(Actually, TsFile does not store null values). Its format is shown as follow:

device_id, timestamp, <measurement_id, value>...

An example is illustrated as follow. In this example, the data type of two measurements are INT32, FLOAT respectively.

device_1, 1490860659000, m1, 10, m2, 12.12

Write TsFile

A TsFile is generated by the following three steps and the complete code is given in the section "Example for writing TsFile".

  1. construct a TsFileWriter instance.

    Here are the available constructors:

    • Without pre-defined schema
    public TsFileWriter(File file) throws IOException
    • With pre-defined schema
    public TsFileWriter(File file, Schema schema) throws IOException

    This one is for using the HDFS file system. TsFileOutput can be an instance of class HDFSOutput.

    public TsFileWriter(TsFileOutput output, Schema schema) throws IOException 

    If you want to set some TSFile configuration on your own, you could use param config. For example:

    TSFileConfig conf = new TSFileConfig();
    TsFileWriter tsFileWriter = new TsFileWriter(file, schema, conf);

    In this example, data files will be stored in HDFS, instead of local file system. If you'd like to store data files in local file system, you can use conf.setTSFileStorageFs("LOCAL"), which is also the default config.

    You can also config the ip and rpc port of your HDFS by config.setHdfsIp(...) and config.setHdfsPort(...). The default ip is localhost and default rpc port is 9000.


    • file : The TsFile to write

    • schema : The file schemas, will be introduced in next part.

    • config : The config of TsFile.

  2. add measurements

    Or you can make an instance of class Schema first and pass this to the constructor of class TsFileWriter

    The class Schema contains a map whose key is the name of one measurement schema, and the value is the schema itself.

    Here are the interfaces:

    // Create an empty Schema or from an existing map
    public Schema()
    public Schema(Map<String, MeasurementSchema> measurements)
    // Use this two interfaces to add measurements
    public void registerMeasurement(MeasurementSchema descriptor)
    public void registerMeasurements(Map<String, MeasurementSchema> measurements)
    // Some useful getter and checker
    public TSDataType getMeasurementDataType(String measurementId)
    public MeasurementSchema getMeasurementSchema(String measurementId)
    public Map<String, MeasurementSchema> getAllMeasurementSchema()
    public boolean hasMeasurement(String measurementId)

    You can always use the following interface in TsFileWriter class to add additional measurements:

    public void addMeasurement(MeasurementSchema measurementSchema) throws WriteProcessException

    The class MeasurementSchema contains the information of one measurement, there are several constructors:

    public MeasurementSchema(String measurementId, TSDataType type, TSEncoding encoding)
    public MeasurementSchema(String measurementId, TSDataType type, TSEncoding encoding, CompressionType compressionType)
    public MeasurementSchema(String measurementId, TSDataType type, TSEncoding encoding, CompressionType compressionType, 
    Map<String, String> props)


    • measurementID: The name of this measurement, typically the name of the sensor.

    • type: The data type, now support six types: BOOLEAN, INT32, INT64, FLOAT, DOUBLE, TEXT;

    • encoding: The data encoding.

    • compression: The data compression.

    • props: Properties for special data types.Such as max_point_number for FLOAT and DOUBLE, max_string_length for
      TEXT. Use as string pairs into a map such as ("max_point_number", "3").

    Notice: Although one measurement name can be used in multiple deltaObjects, the properties cannot be changed. I.e.
    it's not allowed to add one measurement name for multiple times with different type or encoding.
    Here is a bad example:

    // The measurement "sensor_1" is float type
    addMeasurement(new MeasurementSchema("sensor_1", TSDataType.FLOAT, TSEncoding.RLE));
    // This call will throw a WriteProcessException exception

addMeasurement(new MeasurementSchema("sensor_1", TSDataType.INT32, TSEncoding.RLE));

3. insert and write data continually.

  Use this interface to create a new `TSRecord`(a timestamp and device pair).
  public TSRecord(long timestamp, String deviceId)
Then create a `DataPoint`(a measurement and value pair), and use the addTuple method to add the DataPoint to the correct

Use this method to write

public void write(TSRecord record) throws IOException, WriteProcessException

4. call `close` to finish this writing process. 

  public void close() throws IOException

We are also able to write data into a closed TsFile.

1. Use `ForceAppendTsFileWriter` to open a closed file.

  public ForceAppendTsFileWriter(File file) throws IOException

2. call `doTruncate` truncate the part of Metadata

3. Then use `ForceAppendTsFileWriter` to construct a new `TsFileWriter`

public TsFileWriter(TsFileIOWriter fileWriter) throws IOException

Please note, we should redo the step of adding measurements before writing new data to the TsFile.

Example for writing a TsFile

You should install TsFile to your local maven repository.

mvn clean install -pl tsfile -am -DskipTests

You could write a TsFile by constructing TSRecord if you have the non-aligned (e.g. not all sensors contain values) time series data.

A more thorough example can be found at /example/tsfile/src/main/java/org/apache/iotdb/tsfile/

You could write a TsFile by constructing Tablet if you have the aligned time series data.

A more thorough example can be found at /example/tsfile/src/main/java/org/apache/iotdb/tsfile/

You could write data into a closed TsFile by using ForceAppendTsFileWriter.

A more thorough example can be found at /example/tsfile/src/main/java/org/apache/iotdb/tsfile/

Interface for Reading TsFile

  • Definition of Path

A path is a dot-separated string which uniquely identifies a time-series in TsFile, e.g., "root.area_1.device_1.sensor_1".
The last section "sensor_1" is called "measurementId" while the remaining parts "root.area_1.device_1" is called deviceId.
As mentioned above, the same measurement in different devices has the same data type and encoding, and devices are also unique.

In read interfaces, The parameter paths indicates the measurements to be selected.

Path instance can be easily constructed through the class Path. For example:

Path p = new Path("device_1.sensor_1");

We will pass an ArrayList of paths for final query call to support multiple paths.

List<Path> paths = new ArrayList<Path>();
paths.add(new Path("device_1.sensor_1"));
paths.add(new Path("device_1.sensor_3"));

Notice: When constructing a Path, the format of the parameter should be a dot-separated string, the last part will
be recognized as measurementId while the remaining parts will be recognized as deviceId.

  • Definition of Filter

  • Usage Scenario
    Filter is used in TsFile reading process to select data satisfying one or more given condition(s).

  • IExpression
    The IExpression is a filter expression interface and it will be passed to our final query call.
    We create one or more filter expressions and may use binary filter operators to link them to our final expression.

  • Create a Filter Expression

    There are two types of filters.

    • TimeFilter: A filter for time in time-series data.

      IExpression timeFilterExpr = new GlobalTimeExpression(TimeFilter);

      Use the following relationships to get a TimeFilter object (value is a long int variable).

      TimeFilter.eq(value)Choose the time equal to the value
      TimeFilter.ltopen in new window(value)Choose the time less than the value
      TimeFilter.gtopen in new window(value)Choose the time greater than the value
      TimeFilter.ltEq(value)Choose the time less than or equal to the value
      TimeFilter.gtEq(value)Choose the time greater than or equal to the value
      TimeFilter.notEq(value)Choose the time not equal to the value
      TimeFilter.not(TimeFilter)Choose the time not satisfy another TimeFilter
    • ValueFilter: A filter for value in time-series data.

      IExpression valueFilterExpr = new SingleSeriesExpression(Path, ValueFilter);

      The usage of ValueFilter is the same as using TimeFilter, just to make sure that the type of the value
      equal to the measurement's(defined in the path).

  • Binary Filter Operators

    Binary filter operators can be used to link two single expressions.

    • BinaryExpression.and(Expression, Expression): Choose the value satisfy for both expressions.
    • BinaryExpression.or(Expression, Expression): Choose the value satisfy for at least one expression.

Filter Expression Examples

  • TimeFilterExpression Examples

    IExpression timeFilterExpr = new GlobalTimeExpression(TimeFilter.eq(15)); // series time = 15
    IExpression timeFilterExpr = new GlobalTimeExpression(TimeFilter.ltEq(15)); // series time <= 15
    IExpression timeFilterExpr = new GlobalTimeExpression(; // series time < 15

IExpression timeFilterExpr = new GlobalTimeExpression(TimeFilter.gtEq(15)); // series time >= 15
IExpression timeFilterExpr = new GlobalTimeExpression(TimeFilter.notEq(15)); // series time != 15

    IExpression timeFilterExpr = BinaryExpression.and(
        new GlobalTimeExpression(TimeFilter.gtEq(15L)),
    new GlobalTimeExpression(; // 15 <= series time < 25
IExpression timeFilterExpr = BinaryExpression.or(
    new GlobalTimeExpression(TimeFilter.gtEq(15L)),
    new GlobalTimeExpression(; // series time >= 15 or series time < 25
  • Read Interface

First, we open the TsFile and get a ReadOnlyTsFile instance from a file path string path.

TsFileSequenceReader reader = new TsFileSequenceReader(path);
ReadOnlyTsFile readTsFile = new ReadOnlyTsFile(reader);

Next, we prepare the path array and query expression, then get final QueryExpression object by this interface:

QueryExpression queryExpression = QueryExpression.create(paths, statement);

The ReadOnlyTsFile class has two query method to perform a query.

  • Method 1

    public QueryDataSet query(QueryExpression queryExpression) throws IOException
  • Method 2

    public QueryDataSet query(QueryExpression queryExpression, long partitionStartOffset, long partitionEndOffset) throws IOException

    This method is designed for advanced applications such as the TsFile-Spark Connector.

    • params : For method 2, two additional parameters are added to support partial query:

      • partitionStartOffset: start offset for a TsFile
      • partitionEndOffset: end offset for a TsFile

      What is Partial Query ?

      In some distributed file systems(e.g. HDFS), a file is split into severval parts which are called "Blocks" and stored in different nodes. Executing a query paralleled in each nodes involved makes better efficiency. Thus Partial Query is needed. Paritial Query only selects the results stored in the part split by QueryConstant.PARTITION_START_OFFSET and QueryConstant.PARTITION_END_OFFSET for a TsFile.

  • QueryDataset Interface

The query performed above will return a QueryDataset object.

Here's the useful interfaces for user.

  • bool hasNext();

    Return true if this dataset still has elements.

  • List<Path> getPaths()

    Get the paths in this data set.

  • List<TSDataType> getDataTypes();

Get the data types. The class TSDataType is an enum class, the value will be one of the following:

  • RowRecord next() throws IOException;

    Get the next record.

    The class RowRecord consists of a long timestamp and a List<Field> for data in different sensors,
    we can use two getter methods to get them.

    long getTimestamp();
    List<Field> getFields();

    To get data from one Field, use these methods:

    TSDataType getDataType();
    Object getObjectValue();

Example for reading an existing TsFile

You should install TsFile to your local maven repository.

A more thorough example with query statement can be found at

package org.apache.iotdb.tsfile;
import java.util.ArrayList;

 * The class is to show how to read TsFile file named "test.tsfile".
 * The TsFile file "test.tsfile" is generated from class TsFileWrite.
 * Run TsFileWrite to generate the test.tsfile first
public class TsFileRead {
  private static void queryAndPrint(ArrayList<Path> paths, ReadOnlyTsFile readTsFile, IExpression statement)
          throws IOException {
    QueryExpression queryExpression = QueryExpression.create(paths, statement);
    QueryDataSet queryDataSet = readTsFile.query(queryExpression);
    while (queryDataSet.hasNext()) {

  public static void main(String[] args) throws IOException {

    // file path
    String path = "test.tsfile";

    // create reader and get the readTsFile interface
    TsFileSequenceReader reader = new TsFileSequenceReader(path);
    ReadOnlyTsFile readTsFile = new ReadOnlyTsFile(reader);
    // use these paths(all sensors) for all the queries
    ArrayList<Path> paths = new ArrayList<>();
    paths.add(new Path("device_1.sensor_1"));
    paths.add(new Path("device_1.sensor_2"));
    paths.add(new Path("device_1.sensor_3"));

    // no query statement
    queryAndPrint(paths, readTsFile, null);

    //close the reader when you left

Change TsFile Configuration

TSFileConfig config = TSFileDescriptor.getInstance().getConfig();

Copyright © 2024 The Apache Software Foundation.
Apache IoTDB, IoTDB, Apache, the Apache feather logo, and the Apache IoTDB project logo are either registered trademarks or trademarks of The Apache Software Foundation in all countries

Have a question? Connect with us on QQ, WeChat, or Slack. Join the community now.